Poly bag with box packing,one in a box, boxes in cartons for Antenna/Cable TV Coaxial Signal Surge Protector . But if you have special requirements we can make adjustment according to customers' order requirements.
NKP-TEL-4C-T seriesAntenna/Cable TV Coaxial Signal Surge Protector is applied to satellite TV tuner, satellite microwave signal receiver station ,mobile communication, base station antenna system to protect the receiving device avoid to lightning shocking over-voltage caused by feeder induction.
NKP-TEL-4C-T apply to coaxial signal of high frequency, various interfaces are optional
NKP-TEL-4C-T-N1-0.8 apply to coaxial (antenna) signal
NKP-TEL-4C-T apply to coaxial signal
Nominal Operating Voltage (Un)
Max. Operating Voltage (Uc)
Nominal Discharge Current (In)
Max. Discharge Current(Imax)
Voltage Protection Level(Up)
Max. Transmission Frequency
N, BNC, F10, L16, SL16
-40°C ~ +80°C
-40°C ~ +80°C
-40°C ~ +80°C
U/G-type rail bayonet
Packaging & Shipping
Package details: Poly bag with box packing,one in a box, boxes in cartons for Antenna/Cable TV Coaxial Signal Surge Protector. But if you have special requirements we can make adjustment according to customers' order requirements.
Delivery details: 15 days for Antenna/Cable TV Coaxial Signal Surge Protector after order comfirmed
Welcome to visit our place: 86 kilometers Alongside the National Highway 312, Suzhou Industrial Park, Suzhou, Jiangsu, P.R.C;
Prompt response: Any inquiries will be replied within 24 hours;
Aftersale Service: 1). All products will be strictly Quality Checked in house before packing;2). All products will be well packed before shipping. 3). All products have warranty.
Standard packaging, and you can also tell us your own requirements on packaging;
Shipping: We have strong cooperation with DHL,Fedex,UPS and so on. And you can also choose your own shipping forwarder.
Q: How to install the Antenna/Cable TV Coaxial Signal Surge Protectors?
A: Firstly, the lightning protection device is installed in series between antenna channel and the protected device, the output termination is connected with the protected equipment. Secondly, the ground line of lightning protection should be reliable connected with the ground line of lightning protection system. Thirdly, lightningproof grounding should be consistent with lightning protection regulatory requirements, grounding wire should be as thick and short as possible, resistance should be less than 10Ω. Finally, when system work fails and doubt SPD is normal or not, you can examine it after removing the SPD, if we restore to the prior state and its system is back to normal, you should replace the SPD.